Fitting Cat Flap in UPVC Door Panel > 자유게시판

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Cat flaps allow your pet come and go at their own pace, without you having to let him in or out. They can also help stop your cat from urinating in the house.

It is much easier to put a cat flap on a Upvc panel than one made of glass, but you will need some skills and the appropriate tools.

Take a measurement of the door

Installing a cat flap on the door isn't easy but as long as you use the correct type of cat flap make sure you take your time and follow the instructions provided it shouldn't be too much trouble. We will demonstrate how to draw the shape and then use a jigsaw in order to cut out the door's area. Then we'll complete the job by affixing the cat flap. This will ensure that the flap stays in place and protects the door from wind and rain damaging the door.

The first thing you need to do is take a measurement of the width of your pet in order to get a precise measurement of the size of cat flap you'll need. This will allow you to select a cat flap that is big enough for your pet to enter the house and exit without having to open the door each time.

Once you have the measurements, you can determine the location on the door where the template should be placed, usually, this is done using an X, but some kits include drawings that show where to drill, if you have one, then attach it to the door and draw a line around it. If your door has moulding or sill on the bottom of it ensure that you have enough space because this will ensure your cat's safety and prevent them gaining access to your home.

Then put on your eye protection as well as a dust mask, and using a jigsaw, begin to cut along the line you've drawn in, but don't push the blade too hard, as this will cause it to cut faster than you would like it to. If you own an already-cut square, use it to check that you're cutting properly and to ensure that the hole is a good rectangle. Once you are satisfied with this you can begin to remove the remaining door material.

Draw a Line

The cat flap is a great method to allow your pet to go out and in without having to worry about them being in the house with guests or leaving unwanted gifts inside the home. It also prevents draughts, and helps to keep your home's temperature stable. The installation of a cat flap your door can be a daunting task to those who haven't tried it before. Many people will call an expert joiner or carpenter to do the job. This is a viable option, however you can do it yourself if your tools are in order and the instructions are adhered to.

While this is much simpler with a timber door, it is still possible in uPVC doors with cat flap, but you must be cautious not to damage the doors as this will end your warranty. First, you need to measure the door to make sure it will accommodate the new cat-flap. This should be simple enough for an ordinary uPVC door, but you may need to take extra care if you are using an alternative kind of door, as they are more difficult to cut into than solid uPVC panels.

Next, you will need to determine the belly height of your cat. This is the amount of height between the floor and the underside of your cat's stomach. You'll need to locate a space at the entrance that will allow your pet to comfortably pass through. Once you know this you'll be required to mark the area with pencil and a spirit level so that you can be sure that the hole you make will be suitable for your cat.

After you have marked the area, it's time to cut the hole. You will require the jigsaw, and it is important that you be patient to ensure that the cuts are smooth and straight rather than uneven and rough, since this could damage your door. It is also important to wear safety glasses and a dust protection mask at all times when working with the jigsaw as dust from the saw could be hazardous to your health. Once you have completed the cutting, you will have to smooth the edges of the hole with sandpaper so that your cat flap can be fitted easily into place.

Cut a hole

The process of fitting cat flap in upvc door panel (Writeablog blog article) a cat flap into an existing door panel or double glazing cat flap glazing sealed unit is quite difficult. You might be tempted to tackle the job yourself, but unless have a lot of expertise in DIY, it's probably best to get a professional to do the task for you. A faulty job can not only be ugly but also pose an security risk. It could allow cold air in when the cat is outside and hot air to escape when the cat is inside.

The first thing to do is draw the position of the hole in the door using a pencil and a spirit level, this will ensure that it is correctly placed and runs in a straight line with other parts of the door. You should make sure you have some sandpaper on the ready for any rough edges.

Once the line has been marked you should cut out the hole with a jigsaw, remember to wear any safety equipment when working with the power tool. If you are concerned about the sound of a jigsaw you can buy an electric version that is much quieter and easier to use.

You should only remove the material required to create the cat flap. It is important to leave some extra material for the wall thickness of the flap. However cutting off too much material can cause issues or even damage the door frame.

If the door is made of upvc and has a metal panel or frame, it may interfere with the microchip flap. In this situation you'll need to create an extra-large hole to ensure that the metal doesn't come into contact with wall of the flap.

If you are fitting an animal flap to an upvc door or a double glazing cat flap-glazed window with a metal frame, you'll need to talk to a professional who will provide you with a new pane of glass with the hole for the cat flap inside. It is much less expensive to do this than trying to fix a cat flap into an existing pane of glass that hasn't been designed specifically for the purpose.

Fit the Flap

Cat flaps let your pet move around at their own pace, giving them the freedom to lounge inside the house when they're feeling like it. If you've got a uPVC door, it might be difficult to install a cat flap, particularly if you don't own a glass pane that can be cut for one. Luckily, if you're happy to purchase and install a new half-glazed uPVC panel, it's possible to fit a cat flap to these doors. It's not a simple matter of drilling an opening in the door. You'll also have to take a few steps to ensure that the door is safe.

A composite, uPVC, or GRP door panel typically comprises an extremely thin plastic outer skin that is bonded to a soft, polystyrene insulating core. It is crucial to be cautious when cutting the material. This type of door typically has a template which you can use as a guide to cut the hole in your door.

After you have marked out the opening in your front door, it's time to put in the cat flap. You can purchase and install various models, from basic button operated ones to ones that are activated by microchips that allow access only to your pet. No matter which type of cat flaps you choose it's essential that your cat is able to utilize the flap with ease without getting stuck in the rain.

It's a good idea opt for a circular fitting rather than a square one, as circles can be more securely cut into door glass. This is because square holes leave the glass vulnerable to cracking if a drill is used on it. This is also a safer choice because you won't need to drill into the toughened glass, which could break and hurt your pet or family members. This is especially important if there are children or elderly people in your home that could be injured by glass fragments.